Message in a Bottle

A friend sent me a few small clear bottles to see if I could do anything with them, they stand about 6 cms high. This is my first attempt. I used alcohol inks initially to colour the bottle, butterscotch and plum. I stuck the word inspire on the front. Inside is a tag I made and a few small beads hung from a piece of wire, the wire swings freely in the bottle. I am quite pleased with it

A few more birthday bits

Made some more general birthday cards today and a few more Atc's as we have a lot of forum birthdays in February. The backgrounds have all been prepared using distressed inks and an image and happy birthday logo stamped with staz on

Stamped Images with a Distressed Look Atc Swap

These are my stamped image Atc's with a distressed look swaps for a forum I belong to. They haven't photographed too well, but they look ok in the flesh. I think it's because of the textured backgrounds and the dark colours

Birthday Atc's

Also made some birthday Atc's whilst I was at it!!!

Cards Embellished with my UTEE Samples

Needed to make some general birthday cards, and decided to embellish them with my previous UTEE samples

Valentines With A Twist

These are my valentines swaps with a twist. The twist was that we were not allowed to use red or hearts. It was quite challenging

More Faces

Faces on top left and bottom two are made from molds, top right is a cd piece. Top left and bottom right backgrounds are made from cardboard squares dipped in the UTEE. Top right and bottom left backgrounds are also made from cardboard but after being dipped in the UTEE they were placed onto rainbow foil and when cooled peeled off. Not all the foil came away, so I need more practise with this technique!!!! Bottom right UTEE was poured onto the craft sheet and a rubber stamp pressed into the hot UTEE. The stamp had been inked with a clear embossing ink before being placed in the UTEE

CD Faces

Stamped faces onto a blank cd, heated it up and then cut them out. Stuck them in a UTEE with a slight blue tinge, added a bit of alcohol ink and here are the results

Key Chains

The first couple I have made using 2" memory glass and dipped them into the hot UTEE to seal the edges - this is much harder than it looks!!! The third, same thing, except used 1" x 3" pieces of memory glass. \And lastly is another buddie, head bottle top, body UTEE, arms chain and charms and beads for the legs

More Jewellery

Another couple of necklaces. Would you believe that these were made out of the same pot one after the other, and they are completely different colours!!!! Amazing

Lovely CD Clock

This has been made for me by one of my forum friends, LazyKay. It has pride of place hung on my kitchen wall. Thank you so much, it was such a surprise and I LOVE IT

Jewellery

This is my very first attempt at making some of my UTEE pieces into jewellery. The one on the left is the heart that was cut out to make the photoframe. I have added a metal loop to the top and strung some cord through and put a swivel fastener on the ends of the pieces of cord. With the other 2, the cord has been threaded through the middle hole and pulled tight. I might even glue these down, haven't decided yet. Again a swivel fastener has been used on the middle one, the one on the right has been tied in a knot. The one on the left and the one in the middle hang quite high on the neck, whereas the one on the right is quite long as I had to leave enough cord so it would go over my head without getting stuck!!!

Finished UTEE Photoframe

Thought I'd share this. This is my finished product, a present for Lauren, using the UTEE photoframe I created previously. We all know how much she adores Fraz and how much he loves his friz

Thank You Card

This is my thanks card that I made with my UTEE cookie cutter letters

Memory Glass

These have been created using 2 pieces of memory glass and then dipping the edges into the coloured UTEE to seal. Did the one on the left first and then realised that I couldn't attach anything to it, so got wise for the second one and added a metal pin to the top so that I could add a key chain