Industrial Bird House

 

I picked this bird house up today from Aldi for a fiver.

I prised the door and the starfish off the front.

Next I covered all the sides with an industrial style paper.

I cut up a sheet of rhinestones on a mesh background into various shapes and stuck them on the back and the two sides.

I took the roof off and covered both sides with air dry clay.

I pressed different embellishments, tiles and found objects into the clay and I left some of them in to create different textures and interest.

I added clay to the bottom of each of the sides and the back underneath the panel of rhinestones.

And again pushed found objects and embellishments into the clay.

I gave everything a coat of white gesso and once dry a coat of green paint. I used PaperArtsy Tinned Peas.

I added shades of yellow ochre and raw umber with water to the project and kept drying between adding the different colours.

Then I knocked it back a bit by re-apply the green but with a dry brush effect.

Next I added some waxes, aged brass, gold and silver.

I added some carmine for a rust effect and then started working on the top section of the bird house.

Once stuck down, I gave them a coat of gesso.

Then I painted the sides with the same green and umber and ochre paints.

Added the same colours of waxes.

Feet added and studs to the roof.

A workshop at Emlems

 I forgot to take photos on the day, but here are my finished pieces.

Cabinet Frames and Cards

Mr T!m Holtz of Idea-ology has just brought out a fabulous release of new items.  However, some of them to me are 'convenience items' and can easily be made from what you already have.  Therefore, I decided to make my own.

So I made a masterboard from scraps, cut out rectangles and ovals using dies to create the frames.

And I was left with the middle parts, so win win.

I then made some tag shapes and covered them in various background papers.

I also decided to make some more clusters as I was going along as I wanted to try and incorporate them somehow in the tags and frames.

And this is what I ended up with.  The three tags on the right have three of the above clusters incorporated in them.

Inspired by Maggie, Sunset Crafts and Toni, Crafty by Toni.

Trust In Rust Challenge

 

I collected all these pieces of rust over a few days by picking them up out of the gutter on our doggie walks.

Next I started to play around with some of the pieces.

I covered the canvas with patterned papers.

Added some clear crackle.

Once fully dry I smeared some burnt sienna over the crackle so it would sink in the gaps.

Then for the next coat I used carmine in the Finnabair range.

Close ups of the rust.

This is to show the dimensions.

This is the completed piece laid flat.

And this is the completed piece stood up.

I am entering into the Finnabair #trustherustchallenge